
Tip: the first time I attempted the box, I used a piece of test softwood. I used the thinner board as both the top and base of the box. To make this project easier for someone of my skill ability, I drilled all the way through the wood. A drawing showing the 6 drill holes to hold a dice set. You probably have one if you ever were given or bought a set of drill bits. The holes are 1″ across and I used a spade bit. That’s plenty of space to hold a set of 6 dice, the standard D&D set (newb error: 7 is the standard set: d4, d6, d8, d10, d12, d20, d100(%)). The holder is a solid piece of wood with a bunch of holes drilled through it.

You could probably do this with a hand saw but it’d be a bit slower. One piece that’s long and about 1/4″ tall and one that’s about 1″ tall. In the drawings below, I am using the actual height, but it’s the 1″ board. Originally, I thought I was going to need a double layer of wood but in fact this was the perfect height for the dice sets I have. It’s actually smaller than that, about 3/4″ high. That much wood is enough to do this project twice, and still some to spare.Ī note on wood, if you’re new to it.

I believe they were 3 feet long but get as short as you can. To make the box in the photo at the top of this page, I bought 1 piece of 1/4″ x 5″ oak and one piece of 1″ x 5″ oak. I went with some hardwood to make sure it was a bit more durable. I have a decent set of tools as well, but nothing that a typical house owner wouldn’t have. But the boxes aren’t terribly complicated and they are a nice keepsake.

I think the impact Critical Role has had on D&D accessories can’t be understated. There are plenty of really nice dice boxes you can purchase. I decided I would turn my hand to making a dice box as a present. But I’ve been fascinated with the paraphernalia they use: dice bags, rolling boxes, etc. Delayed both in that I started following Campaign 2 and that I never watch it live (past my bedtime). I am a delayed follower of Critical Role, a live Dungeons and Dragons production.
